top of page

Labeled Diagram  Model SNCS1.5K to SNCS10K PPSPG

Switching-Off Procedure for Model SNCS1.5K to SNCS10K

Switching-On Procedure for Model SNCS1.5K to SNCS10K 

Labeled Diagram for  SNCS300 and SNCS500 PPSPG

300 Watt solar energy box

Switching-on Procedure for Model SNCS300 to SNCS500 PPSPG

300 Watt solar energy box

Switching-off Procedure for Model SNCS300 to SNCS500 PPSPG

300 Watt solar energy box

Transient Volatge Surge Suppressor (TVSS) - for DC Power

Transient Volatge Surge Suppressor (TVSS) - for AC Power 

Model SNCS2.5k   Plug and Play Solar Power Generator 

Technical Overview


Model number: SNCS2.5K

Power rating: 2.5KVA

Output Voltage: 230V, 46-60hz

Input DC Voltage: 21.2V  ~ 46V

Weight:                  92Kg

Dimension H*W*D:   

                      (1700*900*320)mm

Operating temp:  -20°C ~ +50°C

Acceptable Batteries:

                      Gel, lithium, flooded


* Supplied with:

 - 1 x 2.5KVA energy box with  

    inbuilt 2 x 100Ah 12V gel battery

 - 4 x 150W solar panel mono


** Upgradability:

 - Can add more 24 x 150W 

    solar panel

 - Can add more 18 x 100Ah 

    12V battery

General Overview 

The 2.5KVA Plug and Play Solar Power Generator (PPSPG) - model SNCS2.5K with power rating of 2.5KV at 230V 50hertz on its output, is a new brand innovative line of hybrid solar energy box, that is conceived, designed and manufactured by Suchnetcom Solar Ltd.


The PPSPG is carefully integrated onboard power electronic circuitry with inbuilt inverter, charge controller, battery storage unit, high/low voltage sensor, over-current self-shutdown unit, voltage surge protection, humidity control, and cooling fans. On the external part of PPSPG there are switching units to control direct current (DC) inputs and output as appropriate, alternating current (AC) output load and AC input supply lines for utility bypass function. 

The PPSPG has external battery connector (EBC) as an option to increase the energy storage capacity of the system. Through the EBC user can willfully increase the number of battery to achieve maximum energy delivery that exponentially meets the maximum load runtime, of which the system is designed to accommodate.


This system comes with 2 units of 100Ah 12V inbuilt gel battery and 4 x 150W solar panel. 

The PPSPG can take lithium or flood battery as well. The external connector can accommodate more 18 batteries 100Ah 12V capacity. While maximum acceptable number of solar panel is 24 x 150Watts.


This energy box is called 'Plug-and-Play'... due to the smart form of operation. It can easily be installed by any competent electrician / solar technician within a few number of hours. Refer to user manual for a more detailed specification. 

Sample load table for 2.5KVA Energy Box

bottom of page