Suchnetcom Solar LTD - Solar Water Heater (SWH)
Suchnetcom Solar LTD - www.suchnetcomsolar.com
           Please Call (+234) 08171968872; Email: suchnetcomsolar@gmail.com;  
                                            sales@suchnetcomsolar.com


Solar Water Heater (Solar Geyser)

Our Services:

Our Solar Water Heater (SWH) System installation department is managed using a unique quality management system designed to consistently deliver quality installations. After-sales service is one of the most important aspects when deciding which solar geyser company to choose. Our service department is quality controlled, making sure you are not left in the cold.


Our Recent Project

You need Flash Player in order to view this.
Solar Water Heater Photo Album
SOLAR WATER HEATER SYSTEM Configuration Technology: Passive (or Thermosiphon)Geyser (Tank) Capacity: 200 litersMax Hot Water Temperature Obtainable Over 6 Hou...







SOLAR WATER HEATER SYSTEM - SPECIFICATIONS and FEATURES 
Configuration Technology:           Passive (or Thermosiphon)
Geyser (Tank) Capacity:             200 liters
Max Hot Water Temperature
Obtainable Over 6 Hours Sunny Day:  270°Celsius
Average Daily Sun Shine:            6 Hours   
Vacuum Tube (or Evacuated Tube):        20 tubes
Inflow Water Capacity:                             200 liters of cold potable water
Outflow Water Capacity:                         200 liters of hot potable water
inflow Polyethylene Pipe Diameter:         25mm (0.984 inch)
Outflow Polyethylene Pipe Diameter:      20mm (0.787 inch)
Inflow Rate of Cold Water:                       17.8 Lit per minute
Inflow Velocity of Cold Water:                   2.58 meter per second
Outflow Rate of Hot Water:                      11.32 liter per minute
Outflow Velocity of Hot Water:                  1.64 meter per second
Inflow Valve Type:                                      Solenoid automatic controlled 12V DC              
Outflow Valve Type:                                   Gate valve (manual)
Geyser (water tank) Platform Height:       13.6 meter
Other Features:                                         230V/50Hz electric heating element

You need Flash Player in order to view this.
Solar Water Heater Vid Clip 1
Configuration Technology: Passive (or Thermosiphon)Geyser (Tank) Capacity: 200 litersMax Hot Water Temperature Obtainable Over 6 Hours Sunny Day: 270°CelsiusAverage Daily ...


Explaining The Technology

The SWH system, is the conversion of sunlight into heat for water heating using a solar thermal collector. SWH Systems are widely used for residential and some industrial applications.
The core of a solar water heater (SWH) is a solar collector (flat plate or evacuated tubes) and a storage tank (geyser). The water is heated up as it travels through the collector (convection process) and hot water is transferred back to the geyser where it is stored.

Flat Plate Solar Collector
Flat Plate Solar Collector
Cross section of single evacuated solar tube
Cross section of single evacuated solar tube
Cross section of evacuated tube
Cross section of evacuated tube
Passive (Thermosiphon) SWH System
Passive (Thermosiphon) SWH System
Active pumped solar water heating system
Active pumped solar water heating system




 
There are 2 basic types of Solar Water Heater Configurations, namely:

Direct (Open-Loop Or Passive Or Thermosiphon) And Indirect (Closed-Loop Or Active Or Pumped) Configurations

Direct Or Open Loop Configuration is one in which the potable water held in the geyser circulates directly from the tank to the solar collector and back again, in effect the water is heated directly as it passes through the solar collector.
Hence, a passive or thermosiphon configuration is the most basic of the two where the geyser is located above the solar collector, either externally on the roof or on a raised internal frame inside the roof space.
Hot water from the top of the collector rises naturally back into geyser while the denser, colder water from the geyser flows to the bottom of the collector to be heated. This is called the thermosiphon effect and can beseen in the demonstrative diagram.

Indirect (Closed-Loop Or Active Or Pumped) Configuration is one in which the fluid that flows to the solar collector is not the actual geyser water itself but rather a glycol mixture, contained within a closed loop, running from the geyser to the collector and back again.The water in the geyser is heated indirectly as the glycol mixture returns from the solar collector and passes through a heat exchanger (or coil) located inside the geyser.

An active or pumped configuration is one in which the geyser is located below the solar collector, usually inside the roof space where a conventional geyser would be located. In these systems, a small, energy efficient circulation pump is used to pump the water around the solar system from the geyser to the collector and back again.

Pumped systems are technically more advanced than passive systems, giving the homeowner more control and interaction with their solar system through an easy to use digital, solar controller interface. The diagram opposite illustrates a standard pumped system configuration.

Application

Indirect Systems are generally only required in frost prone areas where water in a direct system would be likely to freeze, expand and burst the external copper pipes in the solar system. Indirect systems should also be considered in rural areas where poor water quality can, over time, cause damage to the solar collector.